Time, Picfl – Sony GV-300 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

' Select the input mode with the INPUT SELECT button, and the recording mode
with the SP/LP button.
For TV program recording, select the desired
channel.
SP/LP
I Set the time for the recording to begin.
1) Press the + button to set the hour.
Each time you press the + button, the
hour indication increases by one. If
you keep the button pressed, the indi
cation will increase continuously.
QN TIM^
«r-
2
) Press the NEXT button.
3) Press the + button to setthe minutes.
Each time you press the + button, the
minutes indication increases by one. If
you keep the button pressed, the indi
cation wilt increase continuously.
4) Press the NEXT button.
The starting time is now set.
ON
Tl№^
PM 8
t
3<(-
TIME
-PM 8Í--
4
Set the time for the recording to stop.
1
) Set the hour with the + button.
%
picFl
-PM
2) Press the NEXT button.
ON TIME
PM 6:30
3) Set the minute with the + button.
4) Press the NEXT button.
The ending time is now set. The on
screen display disappears.
OFF TIME
PM 9:45
If you have made a mietake
Turn the power off, then on again.
Repeat steps from 1 to 4.
5
Press the TIMER RECON/OFFbunon.
The power goes off and the TIMER REC
lamp lights up (timer recording standby
mode). The recording starts automatical
ly at the preset start time and the power
goes off at the preset end time.
IMER
42
Notes
• During timer recording, both picture and sound will be muted To listen to the sound and watch
the picture, press the LCD ON/OFF button.
• When you press the TIMER REC button, the “CASSETTE" indication will appear if the safety
tab on the cassette is slid out or if no cassette is inserted.
43