Sony GV-300 - Manual (Page 12)

W’
Watching TV
Presetting TV Channels
Your receiver is capable of receiving VHF channels 2-13. UHF channels 14-69 and cable TV
channels 1 (A-
8 ), 98 (A-2), 99 (A-1), 14-36 (A to W), 66-125 (W + 30 to W + 84). The channel
numbers 1-99 will be displayed in the display window.
This unit is preset at the factory to receive certain channels
(see the chart on page 23.) If you want to receive other channels, you need to preset them.
pipiM'Wè«
1
Turn the power on.
The POWER lamp lights up.
If the TV program is not displayed, press
the INPUT SELECT button While pressing the green
button, slide the POWER
switch to the left.
VI'S»
’r' » n "
22
Preset channels
Program position 1 2-13 14-36 37-42 43 44-68 69 70-97 98 99
Corresponding
channel CATV
1
VHF
2-13
CATV
14-36
- • -
« -
CATV
98
CATV
99
Number displayed 2-13 14-36 37-42 43 44-68 69 70-97 98 99
‘ UHF channels are p it around this number.
2
Press the CH PRESET button.
3 Press the POSITION button to select
the desired program position where
the channel Is to be stored.
0
VHP
2 a------- T 13 —
(^SIT ON- S
4 Press the CHANNEL ~/+ buttons
repeatedly to select the channel to be
stored.
The UHF channel range is displayed
after the VHF range *.
Repeat steps 3 and 4 for other channels
to be preset.
5 Press the CH PRESET button.
Channel presetting is completed.
The on-screen display disappears.
CHANNEL
0
0
' After the channel range is displayed, wait for about 2 seconds before next operation.
To change the order of the channel to be stored
Follow the above steps.
23