Hi ’bl, Nmraawappavmiimaiaiaimapawpiaypacrmooa – Sony GV-300 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Tb rtwfnd th* tap« «nd ptay R Mek «utomatfcally — Auto play
While pressing the button, press the t> button.
The “AUTD PLAY” indication appears.
IbimitattMipietiir«
Press the LCD ON/OFF button. To restore the picture, press the LCD ON/OFF button again.
1b «(Qti«t th« pictur«
Adjust the BRIGHT, COLOR, and HUE controls (see page 32.)
1b «top friayback at tlw dMirvd tima
Use the SLEEP function.
The unit goes oft at the preset time, (see page 33.)
When a tap* reeonlaci In atarao mode la ptayed back
The '“(S)” indication appears and the STEREO lamp lights up.
To listen to the stereo sound, use the stereo earphones.
Playbatit of tapes recorded In HIS trtdee eyetom
This unit plays back tapes recorded in HiB* video system.
Howrever, please note the following important conditions.
HiB recording will be played back with standard
8
mm picture quality.
This unit cannot record with HiB picture quality.
Noise may appear in the picture when you play back a tape recorded in HiB LP (long play) mode.
*Hi
8
is the
8
mm recording option found on selected high end
8
mm camcorders and decks.
Wriout PtoytMok MadM
-
CRváTAL-CLEAR MIII/«low/plctura
sMich
on U»
To atop the tape for
a moment — Still
picture
To view the alow
playback picture
To locate a particular
point while viewing
the picture —
Picture aearch
To view the picture
at high apaed — FR
picture aearch
During
playback
hi
’bl
During
playback
During
playback
I,
While
rewinding
Whiie fast
forwarding
h
%
To resume normal play
back, press >. These
modes will be automati
cally released and play
back will resume after the
following time intervals;
Still: 5 minutes Slow*;
1
minutes.
When you n
the button, the unit
will return to the
previous mode.
* After normal playback is resumed, thelw button will not function for about 5 seconds.
nMraawappavmiimaiaiaiMapawpiaypacRmooa
Adjust the picture as follows:
suwyrnL «aws?
1 Ptay back the slow motion picture.
2 Press the SLOW/STILL ADJUST ▼, A buttons to adjust the
picture
80
that the noise does rmt appear.
To adjust the upper portion of the picture, press the
A
button. To adjust the lower portion of the
picture, press the ▼ button. The stilt picture is adjusted at the same time.
46
wnennmpiayvaaKfNmufvmvioivaoonanoinar
tv
or monnoc
The horizontal bands appear in the still, slow, picture search and FR picture search modes.
Noise appears in the still and slow modes. To reduce the horizontal bands, press LCD ON/OFF
button to mule the picture of this unit.
Notes on the CRYSTAL-CLEAR still/alow/picture aearch on LCD
Noiseless pictures can be viewed in the still, slow and picture search modes, owing to the
characteristics of the liquid crystal.
47