Sony GV-300 - Manual (Page 14)

Presetting TV Channels
M imi Ahomwn Owrt
Frequency (MHz) 50 too 150 200 250 300 400 500 600 700 8 X)
VHF/UHF channels
VHF
2-6
VHF
7-13
UHF14-69
CATV channels A-8-
A-2-I J~W W■^30-W-^84
Band indicator VHF UHF
When the CHANNEL + button is pressed, the above channels will be scanned from the lowest
frequency to the highest in sequence. By pressing the CHANNEL - button, the channels will be
scanned in reverse.
• TVCIMniMlChiil*
3
Cable TV systems use letters or numbers to designate channels. To tune in a channel, refer to
this chart.
Number on this TV 1 98 99 14 15 16 17 18 19 20 21 22
Corresponding CATV channel A-8 A-2 A-1 A B C D E F G H 1
23 24 25 26 27 28 29 30 31 32 33 34 35 36 .......................................
J K L M N 0 P Q R S T U V W W+30 . . . . ......... Wr8i
Check with your local cable TV company for more complete information on the available
channels.
* The designation of the cable TV channels conforms to the EIA/NCTA recommendation.
Note
Pay cable TV systems use scrambled or encoded signals and require special converters
(decoders) besides the normal cable connections.
26
Watching TV Programs
1
Pull out the antenna fully.
Be sure to pull out the base of the antenna.
Ifyou haveconnected an external antenna orCATVcable. besureto fold in the telescopic
antenna.
2
Him the power on.
The POWER lamp lights up. While pressing the green
button, slide the POWER
switch to the left.
yjB oW/orr
POWER
3
If a TV program is not displayed, press
the INPUT SELECT button.
The input mode will change as follows:
TV program - ■ ► LINE
^--------- CAMERA
-[¡•To be Continued
27