Sony HVL-IRH - Manual (Page 6)

This mark indicates that this product is a genuine
accessory for Sony video products. When
purchasing Sony video products, Sony
recommends that you purchase accessories with
this “GENUINE VIDEO ACCESSORIES" mark.
Intelligent
I Accessory Shoe
This mark indicates the Intelligent Accessory Shoe
System for use with Sony video products. Video
components and accessories equipped with this
system are designed to make effective recording
simple.
Attaching the video IR
light to a camcorder
To attach the video IR light
1 Insert the video IR light into the
intelligent accessory shoe of your
camcorder in the direction of the arrow
and slit on its bottom until it reaches the
end.
2 Turn the lock knob to LOCK and tighten it
until you hear it click.
To remove the video IR light
Loosen the lock knob by turning it to
RELEASE.
Push down and pull out the video IR light in
the opposite direction of the arrow to
remove it.
Notés
• If you cannot insert the video IR light, turn the
lock knob to RELEASE to cancel the lock.
• Do not insert the video IR light backwards. Be
sure to insert the video IR light in the derection
of the arrow.
0 Shooting in the dark
(using the IR light)
The IR light can be used on a camcorder with the
.\ightShot function. For cfetails of the NightShot
operation, refer to the operating instructions
supplied with the camcorder.