3 connecting to the power source – Cabletron Systems EMC39-12 User Manual

Page 15

Text mode
Original mode

Chapter 2:

Installation

Page 2-4

EMC39-12 User’s Guide

2.3 CONNECTING THE EMC39-12 TO THE POWER

SOURCE

To connect the EMC39-12 to the power source:

1. Plug the power cord into the back panel of the EMC39-12.

2. Plug the other end of the power cord into a grounded wall outlet.

3. Verify that the

PWR

LED

is on; this indicates that the EMC39-12 is

receiving power.

NOTE

The EMC39-12 has a universal power supply. This allows you to
connect the EMC39-12 to power sources from 100 Vac to 125 Vac,
50-60 Hz or 200 Vac to 240 Vac, 50-60 Hz

emc39bk Page 4 Monday, February 12, 1996 4:21 PM