Charging the battery pack – Sony CCD-TR516 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Charging the battery pack
Charge the battery pack on a flat surface without vibration. The battery pack is charged
a little in the factorc.
(1) Open tlie DC IN jack cov er and connect the supplied AC power adaptor to the
DC IN jack with the plug's ▲ mark up.
(
2
)
Connect the power cord to the AC power adaptor.
(3)
Connect the power cord to a wall outlet.
(4)
Slide the POWER switch to OFF. Remaining battery time is indicated by the
minutes on the display window. Charging begins.
When the remaining battery indicator becomes !■],
normal charge
is completed. For
full charge,
which allows you to use the battery longer than usual, leave the battery
pack attached for about 1 hour after normal charge is completed until
FULL
appears in
the display window.
Before using the camcorder with the battery pack, unplug the ,AC power adaptor from
the DC IK jack of the camcorder. You can also u.se the battery piack before it is
completely charged.
Notes
- min" appears on the display until the camcorder calculates remaining battery
time.
> Remaining battery time indication in the display window roughly indicates the
recording time. Use it as a guide. It may differ from the actual recording time.