Before editing, Starting editing, To edit more scenes – Sony CCD-TR516 User Manual
Page 49: To superimpose the title while you are editing, To stop editing, Note on the display function, Note on fine synchro edit
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
You can create vour own video program by editing with any other Cl 8 mm, Hid Hi8,
mini DV, IV DV,
VMS
VHS, SVHS S-VHS,
W5S
VHSC, S.VHSH S-VHSC,
10
Betamax
or B3W?1 ED Betamax VCR that has video/audio inputs.
Before editing
Connect the camcorder to the VCR using the supplied A/V connecting cable.
Set the input selector on the VCR to LINF, if available.
Set FDIT to ON in the menu system (p. 26).
starting editing
(
1
)
Insert a blank tape (or a tape you want to record over) into the
VCR,
and insert
vour recorded tape into the camcorder.
(
2
)
Play hack the recorded tape on the camcorder until you locate the point just
before where you want to start editing, then press
I I
to set the camcorder in
playback pause mode.
(3)
On the VCR, locate the recording start point and .set the VCR in recording
pause mode.
(4)
hirst press
I I
on the camcorder, and after a few seconds press
I I
of the VCR to
start editing.
To edit more scenes
Repeat steps 2 to 4.
To superimpose the title while you are editing
You can superimpose the title while you are editing. Refer to "Superimpose a title" (p.
41).
To stop editing
Press ■ on both the camcorder and the VCR.
Note on the DISPLAY function
If you have displayed the viewfinder screen indicators on the TV, erase the indicators
by pressing DISPLAY on the Remote Commander so that they will not be
superimposed on the edited tape.
Note on Fine Synchro Edit
If you connect a video deck that has the Fine Synchro Edit feature to the LANC
C
jack
of the camcorder, using a LANC cable (not supplied), the edit will be even more precise.
49