Each time you insert the cassette, Kiitiäiitliiiäüiiitlk – Sony CCD-TR516 User Manual
Page 45
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
.kiitiäiitliiiäüiiitLk
Uso this toiituro to check the tape condition betöre recording, so that you can get the
best possible picture (ORC).
(1) While the camcorder is in Standby mode, press MENU to display the menu.
(
2
)
Turn the control dial to select EEI, then press the dial.
(3)
Turn the control dial to select ORC TO SET, then press the dial.
“START/STOP KEY" flashes.
(4)
Press START/STOP.
The camcorder takes about 5 - 10 seconds to check the tape condition and then
returns to Standby mode.
^
Each time you insert the cassette
Perform the aboye procedures.
Notes on the ORC function
• When you set ORC TO SET, the recording on the tape is erased for about 0.1 second so
that the camcorder can check the tape condition. Be careful when you use a recorded
tape. The 0.1 second blank is erased if you record from the point where you set ORC
TO SET for more than 2 seconds, or if you record over the blank.
• You cannot use this function on a tape with the red mark on the cassette exposed.
• ORC stands for "Optimizing the Recording Condition."
45