beautypg.com

Power saving function, Note, Displaying the information osd – Sony CPD-L150 User Manual

Page 17: Plug & play, Technical features

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Technical Features

Power Saving Function

This monitor meets the px)wer-saving guidelines set by
VESA and ENERGY STAR, as well as the more stringent

NUTEK.

^

If the monitor is connected to a computer or video graphics
board that is VESA DPMS (Display Power Management
Signcding) compliant, the monitor wUl automatically reduce
power consumption in three stages as shown below.

You can set the delay time before the monitor enters the
power saving mode using the OSD. Set the time according

to "Setting the Power Saving Delay Time" on page 14.

Note

If no video signal is input to the monitor, the "NO INPUT
SIGNAL" message (page 18) appears. After the delay time has
passed, the power saving function automaticcilly puts the monitor
into the active-off mode and the (1) indicator lights up orange. Once
the horizontal and vertical sync signals are detected, the monitor

automatically resiunes its normal operation mode.

Power consumption

Screen Horizontal

mode_______________________ sync signal

Vertical

Power

consumption

sync signal___________________

Recovery time (1) Indicator

1 Normal operation active present

present CPD-L133 S30W <42W»‘

CPD-L150 ¿25 W» <35W»»

Green

2 Standby (1st mode) blank absent

present CPD-L133 ^ 1.5 W* <4 W** Approx. 3 sec. Green and orange

CPD-L150 :£ 15 W» < 4 W»

alternate

3 Suspend (2nd mode) blank present

absent

CPD-L133 51.5 W* S 4 W** Approx. 3 sec. Green and orange

CPD-L150 ^1.5W <4W»»

alternate

4 Active-off (3rd mode) blank absent

absent

CPD-L133 ¿15W» S4W«

CPD-L150 ¿15W» <4W»»

Approx. 10 sec. Orange

5 Power-off

CPD-L133

¿15W»

<4W«

CPD-L150 ¿15W» <4W»»

Off

* Power consumption of the monitor only
** Power consumption of the monitor including the AC adaptor

Displaying the INFORMATION

OSD

You can confirm the name, the seried number and the year
of manufacture of this monitor.

Press and hold the MENU button for five seconds.

The INFORMATION OSD appears.

Plug & Play

This monitor complies with the DDC™1 and DDC2B
Display Data Channel (DDC) standards of VESA.
When a DDCl host system is cormected, the monitor

synchronizes with the V. CLK in accordance with the VESA
standards and outputs the EDID (Extended Display
Identification Data) to the data line.

DDC™ is a trademark of the Video Electronics Standard
Association.

O INFORMATION

MODEL :CPD-L150
SER. NO : 1234567 ------------
MANUFACTURED : 1998,

- Model name

■ Serial number

. Year of manufacture

The INFORMATION OSD automatically disappears after

about 30 seconds.
To close the OSD, press the MENU button again.

17

This manual is related to the following products: