Sony CCD-F301 - Manual (Page 8)

(C-5)
1
ConnMtlng the Power Sources
Using Alkaline Batteries
(C-5)
The EBP-55 battery case is required (not
supplied).
1 Insert the size AA (R6) alkaline batteries
Into the battery case.
2 Attach the case in the same way as the
battery pack.
Battery life (When using Sony alkaline
batteries); approx. *«5 minutes
(continuous recording when used indoors)
To remove the battery case
Proceed in the same way as the battery pack.
See page 13
Notes on battery Mfe
• Batteries will not last as long in cold places
• No indication appears in the viewlmder to wai
weak battery
Using House Current
(C-6)
The supplied AC-V60.'V60A AC power adaptor is
required.
1 Align the right side of the connecting plate
with the line on the camcorder, and slide It
in to the right.
2 Connect the AC power adaptor to a wall
outlet.
3 Set the CHARGE/VTR selector to VTR (DC
OUT).
See the instruction manual of the AC power
adaptor lor details.
To remove the connecting plate
Proceed in the same way as the battery pack
See page 13
The AC V30 01 AC-V55 AC power adaploi can also be
(C-7)
[ Preparing your camcorder 1
Using Car Battery
(C-7)
The DCP-77 DC pack is required (not supplied)
1 Align the right side of the DC pack with
the line on the camcorder, and slide It in to
the right.
2 Connect the cord to the cigarette tighter
socket of a car (12 V or 24 V).
To remove the DC pack
While pressing the ВАТТ knob on the camcorder,
slide the DC pack to the left and pull out
other options
• The AC V55 AC power adaptor and the DCC I6AW
car battery cord cati also be used to operate this
camcorder on a 12 V or 24 V car battery
• The DCP 55 DC pack can also be used to operate
this camcorder on a 12 V or 24 V car battery
14 15