Sony CCD-F301 - Manual (Page 25)

Editing onto Another VCR
You can create your own video program by
editing with any other 8-mm, Betamax. or VHS
format VCR. Also you can superimpose and
record a title.
Before You Begin
(S)
• Make connections using the supplied AC power
adaptor and a commercially available audio/
video cable (like Sony VMC-710M/720M for
monaural equipment, or VMC 910MS'920MS
lor stereo equipment)
• Set the input selector of the VCR 1o LINE, it
• Set EDIT on the camcorder to the direction ot
the arrow
1 Insert a tape for recording into the
recording VCR.
2 Set POWER of the camcorder to VTR and
insert the recorded tape.
3 Play back the tape on the camcorder and
locate the point where you want to start
editing and set the camcorder to the
playback pause mode.
4 On the recording VCR, locate the
recording start point and set the VCR to
the recording pause mode.
5 Press H of both units simultaneously to
start editing
To stop editing momentarily, press II on the
recording VCR
To edit more scenes, repeal steps 3 to 5.
To slop editing, press ■ on both units.
Recording from Another
VCR or a TV
You can record a TV program from the TV or;
tape from another VCR equipped with audio
video outputs
Before You Begin
• Set the IN OUT selector on the camcorder to
IN.
• Make conneclions usmg a commercially
available audio video cable iiike Sony VMC-
710M/720M lor monaural equipment, or VMC-
910MS.'920MS lor stereo equipment)
> Disconnect the RFU adaptor from the AC
power adaptor, if it is connected
When disconnecting, turn oft the power of the
adaptor. (OFF)
1 Turn on the TV or VCR.
2 Select the TV channel or play back the
tape to 6e recorded.
3 Set the POWER of the camcorder to VTR.
4 Insert a tape and slide • REC.
Recording will slart.
You can monitor the picture being recorded in
the viewfinder screen
I) you use the DATA SCREEN function
Trie inaicatioii' ctispia/ea or ire IV screen
48