Sony CCD-F301 - Manual (Page 23)

Connttctions for Playback
K your TV Is connftcted with a VCR (Q-2)
Dr-,connecl llie anlenna connochon of iho TV
VCR nnd insert the RFU adaptor between ih(
The supplied AC-V60/V60A AC power adaptor is
required.
Make sure that the TV is turned oil to prevent the
speaker being damaged.
1 Connect the AC power adaptor to the TV.
Use a commercially available audio'video
cable (like Sony VMC-710M/72OM for
monaurai TV, or VMC-910MS/920MS for
stereo TV)
2 Connect the AC power adaptor to a wall
outlet.
Usually keep the AC power adaptor and the TV
connected
Whenever playing back a tape
Proceed only the following two steps
3 Attach the connecting plate of the AC
power adaptor to the camcorder.
4 Set the CHARGE/VTR selector on the AC
power adaptor to VTR (DC OUT).
The supplied wireless Remote Commander is
useful to control the camcorder from a distance
When using it, be sure to set the REMOTE
COMMANDER ON'OFF switch to ON
(R-1)
1 Set CHARGE/VTR on the AC power adaptor
to VTR.
Set POWER to VTR while pressing the
green button.
Insert a tape.
4 Turn on the TV (or the VCR).
For a TV with video/audto input jacks;
Sei the TV/VIDEO selector to VIDEO.
For a TV without video/audio input jacks
Select the channel for playing back the
camcorder.
5 Press T'.
Playback begins.
You can also use l • on the camcorder.
To stop playback, press ri.
To rewind the tape, press 44.
To advance the tape rapidly, press
To make the same Indications in the viewfinder
appear on the TV
Press DATA SCREEN.
To clear the indications, press DATA SCREEN
again.
After playing back
Set the POWER switch on the camcorder and
CHARGE/VTR selector on the AC power adaptor
to OFF. * •
Notes
• When the stiH picture lasts for 5 minutes or more, the
camcorder automatically enters the stop mode.
• Streaks appear in the still picture. They are wider when
playing back an IP-recorded tape
45