Sony CDP-997 - Manual (Page 42)

r
Chapter 5 Additional Information
Maintenance Specifications
Cleaning Your Player
Clean the cabinet, panel and controls with a soft cloth
lightly moistened with a mild detergent solution. Do not use
any type of abrasive pad, scouring powder or solvent such
as alcohol or benzine.
Cleaning Discs
When a disc becomes dirty, clean it with a cleaning cloth.
Wipe the disc from the center out.
Do not use soivents such as benzine, thinner, commercialiy
availabie cleaners or anti-static spray intended for anaiog
discs.
Compact disc player
Frequency response
Signal to noise ratio
Dynamic range
Harmonic distortion
Channel separation
Outputs
LINE OUT (FIXED)
(phone jacks)
LINE OUT (VARIABLE)
(phone jacks)
DIGITAL OUTPUT
(OPTICAL)
(optical output
connector)
HEADPHONES
(stereo phone jack)
General
Power requirements
Power consumption
Dimensions
Weight
2 Hz-20 kHz ±0.3 dB
More than 115 dB
More than 100 dB
Less than 0.0025%
More than 110 dB
Output level 2 V (at 50 kilohms,
non DSP mode)
Load impedance over 10 kilohms
Output level max. 2 V
(at 50 kilohms, non DSP mode)
Load impedance over 50 kilohms
Wave length 660 nm
Output level -18 dBm
Output level max. 28 mW
Load impedance 32 ohms
120 V AC, 60 Hz
17 W
Approx. 430x110x355 mm
(w/h/d)
(17x43/sXl4 inches)
Including projecting parts and
controls
Approx. 4.6 kg (9 lbs 15 oz), net
Remote commander (RM-D997)
Remote control system
Power requirements
Dimensions
Weight
Infrared control
3 V DC with two batteries size
AA (I EC designation R6)
Approx. 62X18X175 mm
(w/h/d)
(
21 / 2 X 23 / 32 X 7 inches)
135 g (4.6 oz)
Including batteries
Supplied accessories
Connecting cord (1)
(2 phono plugs <-> 2 phono plugs)
Remote commander (1)
Sony SUM-3(NS) batteries (2)
Optional accessory
Audio optical connecting cord POC-15
Design and specifications are subject to change without
notice.
42