Memorizing a dsp (digital signal processor) mode, Clearing a dsp fiie, Press file during the dsp indicator is lighting – Sony CDP-997 User Manual
Page 40: Press erase during the dsp indicator is lighting, Playing the disc using the dsp file, To change dsp mode without erasing the dsp file, To change dsp files
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Memorizing a DSP (Digital Signal Processor) Mode
The DSP modes, can be stored in memory to correspond with a certain disc. By
making a DSP file, you can insert of select a disc and have it played to a
pre-selected acoustic atmosphere.
Making a DSP File
Clearing a DSP Fiie
Seiect the desired DSP mode,
(see page 14)
Press FILE during the DSP indicator is lighting.
FLAT also can be memorized.
CD
Light up except for FLAT.
^... ...........
Ligh s up
insert the disc whose DSP mode to be cleared
in the tray.
2
Press DSP/1-20 (or SELECT on the remote
commander).
The DSP indicator lights up.
Press ERASE during the DSP Indicator is
lighting.
When “FILE ERASE” is displayed and “DSP”
disappears, the DSP file is cleared. The DSP mode
is also cleared automatically.
Note
Ttie effect level setting cannot be stored.
Playing the disc using the DSP file
Each time a disc is inserted into the player, the designated
DSP mode will automatically set to play.
To change DSP mode without erasing the DSP file.
Change the DSP mode as you want and play, press FILE
RECALL.
The preceding DSP mode will be set.
To change DSP files.
Select a new DSP mode. Press FILE during the DSP
indicator is lighting. The new DSP mode will be stored in
the DSP file.
40