Sony CDP-997 - Manual (Page 11)

Information Display
Checking the totai number of selections and totai piay
time
There are two ways.
a) Place your disc on the tray and then either press £ to
automatically close the tray or manually close it.
b) Press TIME/MEMO (or TIME on the remote
commander) during stop.
If disc contains more than 20 selections
► appears in the display window behind 20 on the music calendar.
Checking the remaining piaying time
Each time you press TIME/MEMO (or TIME on the remote
commander) during play, the display changes to give you
the following information.
Selection num ber lapsed playing time
Index number
TINC/MEMO
Remaining time
in a selection
If the current selection number is over 24,
is displayed. ^
*lf “----------- ” is displayed instead of the remaining
time
- You have played a disc containing more than 24
selections in the shuffle or delete play mode.
-You have programming more than 24.
To change the parts of information display LU
Each time you press DISPLAY MODE on the remote
commander during play, the display changes to give you
the following information.
Entire display appears. ^---------
i
Track number, Index number
and playing time appear.
i
Entire display disappears. —
To adjust the brightness of the display
-DIMMER function
\A]
Press REPEAT while holding down on TIME/MEMO. The
brightness adjustment has three tones. The tone you select
will be stored in memory so that you do not have to adjust
it again after turning the power off.
Note
The time display mode selected with the TIME/MEMO button will not change
until the power is turned off.
If you have stored a disc memo
The stored disc memo will be displayed, following the display of the
remaining, lime of the disc.
11