Sony CDP-997 User Manual
Compact ixsc player, Sony
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table of contents
Document Outline
- SONY
- Compact IXsc Player
- Warning
- Table of Contents
- Overview
- Precautions
- Unpacking
- Hooking Up the System
- Identifying the Parts
- Front Panel
- Chapter 3 Basic Operation
- Information Display
- Checking the totai number of selections and totai piay time
- Checking the remaining piaying time
- *lf “ ” is displayed instead of the remaining
- To change the parts of information display LU
- To adjust the brightness of the display -DIMMER function \A]
- Locating a Particular Selection
- a) To locate sequentially
- To locate the beginning of the succeeding selection
- b) To locate directly
- Locating a Particular Point in a Selection
- a) To search quickly while monitoring the sound
- To search quickly by observing the display
- To Play a Selection Immediately from the Beginning - Auto Cue
- Adjusting the EFFECT level
- About Surround Sound
- Clearing the DSP Mode
- Playing in a Random Order - shuttle piay
- Playing Only the Desired Selections - Delete Play
- Playing the Beginning of Each Selection
- Press MUSIC SCAN during stop.
- If you press MUSIC SCAN during play of the beginning of a particular selection:
- To start play immediately
- To stop the music scan play during scanning
- Press MUSIC SCAN |
- When playing the beginning of an undesired selection, press CLEAR.
- When music scan delete play ends
- To put back a selection which you have deleted
- To put back all selections which you have deleted,
- Playing Repeatedly - Repeat Play
- Playing in a Desired Order-Program piay
- Fading in And Fading out Piay - Fade-in/Fade-out
- Custom Edit
- Recording Programed Selections on a Tape
- Designating the Piaying Order of Up To 6 Discs
- Programming
- Press PROGRAM.
- Program desired seiections on the first disc.
- Replace the first disc with the second one.
- Repeat steps 3 and 4 to program additional selections.
- To proceed to program selections to be recorded on side B
- To check the current disc number
- To program selections on the same disc
- To play the selections for side B
- To cancel multi-disc program
- To check your program
- To Change Your Program
- Designating the Total Playing Time
- Programming
- 1 Choose either time edit or just edit during stop, press EDIT/TIME FADE.
- Specify a desired recording time.
- a) When you specify a commercially available tape length:
- About the HALF DISC edit
- b) When you specify a free tape length:
- After specifying the desired recording time, press EDIT/TIME FADE once.
- • When you choose time edit
- Press EDIT/TIME FADE once more, to make a program for the other side of your tape.
- To stop playing
- To cancel time edit/just edit
- To erase the entire program
- Editing Navigation
- Adding Selection(s) — Link Edit —
- Programming
- Fading Out at the Desired Time — Time Fade
- Locating the Loudest Portion of the Disc-Peak Search O
- inserting a Blank Space Between Selections -Auto Space
- Custom Files
- storing an Optimum Playback Level for Each Disc
- Assigning Names to a Disc - Disc Memo
- Indexing a Disc - Custom Index
- Keeping the Program in Memory - Program Bank
- Keeping Your Undesired Selections in Memory
- Memorizing a DSP (Digital Signal Processor) Mode
- Clearing a DSP Fiie
- Seiect the desired DSP mode, (see page 14)
- Press FILE during the DSP indicator is lighting.
- insert the disc whose DSP mode to be cleared in the tray.
- 2 Press DSP/1-20 (or SELECT on the remote commander).
- Press ERASE during the DSP Indicator is lighting.
- Playing the disc using the DSP file
- To change DSP mode without erasing the DSP file.
- To change DSP files.
- Timer Activated Playing
- Connection and Operation
- _Z_
- Audio timer
- Connect the timer to the piayer and power on the timer.
- Power on the player and insert a disc in the player.
- Set a desired play mode.
- Set the timer to a desired play start time.
- Set TIMER to PLAY position.
- Keep the POWER switch depressed on the player
- When the timer-activated play ends
- To play in the program play mode
- If you select the custom index play mode
- Chapter 5 Additional Information
- Maintenance
- Specifications