Sony CDP-997 - Manual (Page 37)

Playing from the Desired Custom Index Clearing Custom Indexes
There are three ways to play from a desired custom index.
a) To play from an index to the end of the disc
1
Press C.INDEX.
2
Select the desired custom index by pressing the
corresponding numeric button 1 through 10.
b) To play from one index to the next
1
Press C.INDEX twice so that “C.INDEX 1” and
“SINGLE” are displayed.
2
Select the desired custom index by pressing the
corresponding numeric button 1 through 10.
To play repeatedly between adjacent indexes
Press REPEAT between steps 1 and 2 above. To cancel repeat play,
press REPEAT again.
c) To access an index during play
IX
1
Press C.INDEX
2
Press -a—/—s. on the remote commander.
— A c c e s s e s the next index.
■a—: Returns to the preceding index.
(to go further back, use the numeric button.)
1
Press C.INDEX.
C.INDEX appears.
2
Press CHECK.
Each time you press CHECK, index number blinks.
Select the index number you want to delete.
3
Press ERASE while Index number blinks.
The specified index will be erased and the
succeeding index numbers will move up one.
To release play using custom indexes
Press one of the PLAY MODE buttons (PROGRAM,
SHUFFLE or CONTINUE). The music calendar appears.
Recommended application of custom indexes
When the selections on your disc are symphonies or
concertos, their selection number is not useful for locafing
their chapters. In this case, you are recommended to
assign a custom index to each chapter so that you can
locate it easily. When you want to play only one chapter,
you are recommended to choose Custom Index 1 (Single).
37