Press dolby pro logic on/off, Note, To select hall or simulated mode – Sony SA-VA1 User Manual
Page 11: Adjust the volume, To change the display, To obtain powerful bass sound, Notes, To mute the sound
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Select the surround sound mode.
To select DOLBY mode:
Press DOLBY PRO LOGIC ON/OFF.
'TRO LOGIC" appears on the display.
•D0L8Y PRO LOGIC-
OMOPF
15
•PROLCK3IC-.
«0FF| I MODE I
Operation panel
Remote commander
Note
The DOLBY PRO LOGIC MODE button is
operable only when an external center speaker is
connected to the CENTER OUT jack (see page
14).
To select HALL or SIMULATED mode:
Press SURROUND.
Each press of the button changes the mode as
follows:
HALL ♦SIMULATED
♦ ♦
surround off
SURFIOUNO
15
?
Operation panel
Adjust the volume.
-O IMSTERVOL O *
i f
(i"T
Operation panel
Remote commander
a
Remote commander
To change the display
Press the DISPLAY button on the operation panel.
Each press of the button changes the display as follows:
Normal display brightness
♦ ♦
Display off ♦ Dimmed
Pressing the function buttons when the display is off
momentarily causes the display to light up.
To obtain powerful bass sound
Press the SUPER WOOFER ON/OFF button.
When you press this button, the S. WOOFER indicator lights
up and powerful bass sound is output. Two super woofer
modes are provided for either movies or music. To select
either mode, press SUPER WOOFER MODE button to select
either MOVIE or MUSIC.
Notes
• Some commercially available software may have Dolby
surround sound tracks even though it does not carry the
mark on the package.
• Software with the "[X](^s^^"mark may have weak
rear
To mute the sound
Press the MUTING button.
"MUTE" appears on the display and the sound is muted.
Press the button again or press MASTER VOL + (or
VOLUME +) to turn off the muting function.
11