Adjusting the brightness (exposure compensation), Continuous shooting, Adjusting the brightness – Canon IXUS 990IS User Manual
Page 76: Exposure compensation), W continuous shooting, Sation), P. 76), Select the exposure compensation, Adjust the brightness, Select the drive mode
76
You can adjust the standard exposure set by the camera in 1/3-stop
increments in the range of –2 to +2.
Select the exposure
compensation.
●
Press the
o button.
Adjust the brightness.
●
While watching the screen, press the
qr
buttons or turn the
 dial to adjust the
brightness and press the
m button.
You can shoot continuously at about 1.0 images/second.
Select the drive mode.
●
Press the
m button to select
, then
press the
r button.
●
Press the
op buttons to select W, then
press the
m button.
Shoot.
As long as you hold the shutter button
down, the camera will shoot successive
images.
Adjusting the Brightness
(Exposure Compensation)
W Continuous Shooting
•
Cannot be used with the self-timer
•
For continuous shooting, the focus and exposure are locked when the
shutter button is pressed halfway.
•
As the number of images increases, the shooting intervals may take
longer.
•
If the flash fires, shooting intervals may take longer.