beautypg.com

Connecting to the amplifier q – Sony PS-J10 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

□

P S - J 1 0

□

Connecting to the
Amplifier Q

Connect the red plug to the right-
channel PHONO IN jack (R), and
the white plug to the left-channel
PHONO IN jack (L) on the
amplifier.
If your amplifier does not have
PHONO IN jacks, connect the plugs
to the AUX IN or LINE IN jacks.

Set EQ ON/OFF on the bottom
panel according to the amplifier
connection as follows:

For connection to

Set EQ ON/OFF to

PHONO IN jacks

OFF

AUX IN or LINE IN ON
jacks

To remove the dust cover

(Fig. 0 )

Lift the cover until it stops, then push
upward on the bottom edge of the cover
until the cover slides off the hinges.

8

See also other documents in the category Sony CD-players: