Editing recorded mds – Sony MDS-JE330 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Editing
Recorded MDs
This chapter explains how to edit the
tracks that have been recorded on an
MD.
MENU/NO YES
fel 0 0 o
1 1 .0
IE
EO
j
1
\
AMS ■♦
Brief descriptions of buttons and controi
used to edit iWIDs
The buttons and the control below are used to erase,
divide, move, or combine tracks on the MD.
Note
The operation of these buttons and the control is different when
naming a track or MD. For details, see "Naming a Track or MD"
on page 33.
MENU/NO button:
While the deck is stopped, playing,
or paused, press to edit tracks. While editing, press to
cancel editing.
AMS control:
Turn to select an editing operation or track
number, then press to enter your selection. You can also
use the control to specify points in a track for erasure or
track division.
YES button:
Press this button instead of the AMS control
to enter a selection.
■«/►► buttons:
Press to specify the unit (minute,
second, or frame) by which the MD is advanced when the
AMS control is turned. You can also use these buttons to
locate the end point of the portion to be erased.
For further details on the function of each button and
control, see the sections on editing operations.
28