Sony RM-V7 - Manual (Page 7)

Brand Component Code No.
Mitsubishi/MGA VCR 23, 24,25, 26
TV 24,03,12
Multilech VCR 25, 38, 21
NEC VCR 14, 36, 37
TV 03,12
Olympic VCR 09,08
Panasonic VCR 08,09,06,07
TV 18,16,17, 07
TV/VCR
Combo 18 (TV)&
08,09 (VCR)
Pentax VCR 05,04
Philco VCR 08,09
TV 11,13,03
Philips VCR 10, 08, 09
TV 11
Pioneer
VCR 08
TV 37,18,19
Portland TV 03,08
Quasar VCR 08, 09
TV 18, 07
TV/VCR
Combo 18 (TV) & 09
(VCR)
Radio Shack TV 02,12, 24, 23
RCA/PROSCAN VCR 04, 05, 08, 09, 10,
11,12,13
TV 02,03, 04,05,06,
07,08
TV/VCR
Combo 18 (TV) & 08
(VCR)
Realistic VCR 09, 30, 28, 35, 24,
38
Sansui VCR 14
Singer VCR 15
Samsung VCR 22,13, 21
TV 26,12,13, 03
TV/VCR
Combo 23, 27 (TV) &
21, 22. 26 (VCR)
Sanyo VCR 30, 35
TV 25
Scott VCR 12,13, 21, 35, 23,
24, 25, 26
TV 23,12
Sharp VCR 27, 28
Cable Box Codes
Brand Code No.
Hamlin/Regal 22, 23,24, 25,26
Jerrold/G,I. 01,02,03,04, 05,06,07,08,
18
Oak 27, 28, 29
Panasonic 19,20, 21
Pioneer 14,15
Scientific Atlanta 09,10,11
Tocom 16,17
Zenith 12,13
Troubleshooting
If you're having problems
setting up or using the
Remote Commander:
• When setting up the Commander, carefully go
through the procedures described under "Setting
Up the Commander". If the code that’s listed first
for your component doesn't work, try all the
codes listed for your component - in the order in
which they're listed. If all the codes fail to work
(or if your component is not listed in this manual),
try using the procedures under "Searching for the
Correct Code".
• When setting up the component, if you press the
wrong button, press and release the S (Set) button.
Then enter the correct code number again.
• Check that you're aiming the Commander directly
at the component, and that there are no
obstructions between the Commander and the
component.
• Make sure the batteries you're using are not worn
out, and that they're inserted correctly. Note that
whenever you remove the batteries - to replace
them, for example - the preset codes are erased
from memory and must be reset.
• Check that the component has infrared remote
capability. For example, if your component
didn't come with a remote, it probably isn't
capable of being controlled by a Remote
Commander.