Sony ICD-R100VTP - Manual (Page 32)

"M" is displayed when the number of the message with alarm setting is
selected.
At the set time, the alarm will sound tor about 10 seconds and the selected
message will be pla\ ed back.
During playback, "ALARM" will flash in the display window.
When the pla\’back ends, the unit u ill stop automatically at the beginning
of that message.
To listen to the same message again
Press ►PLAY/STOP. The same message will be played back from the
beginning.
To cancel the alarm setting before the playback starts
Press BSTOP while the alarm sound is heard. You can stop ev'en when the
HOLD function is activated.
Notes
• You cannot set the alarm if you have not set the clock or there is no message in
the selected file (the unit will not enter the alarm setting mode when you press
MENU in Step 2 on page 28).
• if you try to set the alarm to play back a message at a previously set time on
another message, "PRE SET" will be displayed, preventing new settings.
• If the alarm time comes while another message is being played back with an
alarm, the playback stops and the new message will be played back.
• If the alarm time comes during recording, alarm will sound for 10 seconds
after the recording is finished and playback begins. "('•>)" will flash when the
alarm time comes.
• If more than one alarm time conies during recording, only the first message
will be played back.
• When the alarm time comes when the unit is in the menu mode, alarm will
sound and the menu mode will be cancelled.
• If you erase the message you set the alarm to play back, the alarm setting will
be cancelled.
• If you add an index to the message you set the alarm to play back, playback
will stop at the index.
• If you erase the index on the message you set the alarm to play back, the alarm
setting will be cancelled.
• You can adjust the playback volume with the VOL control.
O
3"
Continued
31