Choose the dialing mode, If you aren't sure of your dialing system – Sony SPP-M932 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

• Use only the supplied AC-T122 AC power adaptor.

Do not use any other AC power adaptor.

• Connect the AC power adaptor to a continuous power

supply.

• Place the base phone close to the AC outlet so that

you can unplug the AC power adaptor easily.

Notes

Polarity of the plug

Tips

• If your telephone outlet is not modular, contact your

telephone service company for assistance.

• LI is the first phone line connected to center pair of

wires. L2 is the second phone line connected to outer
pair of wires.

Choose the dialing mode

For the telephone to work properly, select an appropriate dialing mode
(tone or pulse).

Depending on your dialing system, set the DIAL MODE switch as
follows:

If your dialing system is

Set the switch to

Tone

TONE

Pulse

PULSE

If you aren't sure of your dialing system

Make a trial call with the DIAL MODE switch set to TONE.
If the call connects, leave the switch as is; otherwise, set to PULSE.

Getting Started |