Sony MDS-302 - Manual (Page 4)

Getting^ Started
Unpacking
Chock that vou roceivi'd tlio following items:
• Audio connecting cords (2)
• Remote commander (remote) (RM-DoM) (1)
• Sonv SLJAl-3 (NS) batteries (2)
Inserting batteries into the remote
You can control the recorder using the supplied
remote.
Insert two R6 (si/.e AA) batteries by matching the e
and - on the batteries. When using the remote, point
it at the remote sensor 13 on the recorder.
'(A' When to replace batteries
With normal use, the batteries should last for about six
months. When the remote no longer operates the
recorder, replace all the batteries with new ones.
Notes
• Do not leave the remote near an extremely hot or humid
place.
• Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
• Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
• If you don't use the remote for an extended period of time,
remove the batteries to avoid possible damage from battery
leakage and corrosion.
Hooking Up the System
Overview
This section describes how to hoiik up the VIO rt'corder
to an amplifier or cither components such as a CD
player or DAT deek. He sure to turn off the power of
each component bi'fore connection.
to a wall outlet (or to a
timer during timer
recording or playback)
Connect only
one digital
component at
a time
DAT deck
or
MD recorder
; Signal flow
What cords will I need?
• Audio connecting cords (supplied) (2)
Optical cable (not supplied) (I )
------------------ -cOп