Sony MDS-302 - Manual (Page 10)

Recording on MDs
Synchro-Recording With a Sony
CD Player T
Bv connecting vour recorder to n Sony CD player or
Hi-Fd Component System, you can easily dub CDs onto
MDs using the CD synchro buttons on the remote. If
your recorder is connected to a Sony CD pslaver bv the
optical cable through DIGITAL IN (digital input),
tracks are automatically recorded in the same sequence
as the original regardless of whether "I.evelSvnc ON"
or "LevelSvncOFF" is selected. If vour recorder is
connected to a Sony CD player by audio connecting
cords through UNE IN (analog input), tracks are
automatically recorded when you select "LevelSync
O.N" (see "Marking Track .Numbers While Recording"
on page 9).
As the same remote controls both the CD player and
the recorder, you may have trouble operating both
units if they are far from each other. If you cio, place
the CD player close to this recorder.
cd cn cD,
üc N i ' a T cjcj
a CJ 'del Gel U
LGJ ca igj Gp !eU
W3 CGI CGJ aJ GU
CGI g ;
El CD C 3
E GG) L a G3 Gil
cu Ció c a 'GdiSd
_pa S G
E Inicia da ÍJ&
IGGl
STOP
■ START
■ STANDBY
■ CD PLAYER II
6 Press START.
The recorder starts recording and the CL) player
starts playback.
The track number and elapsed recording time of the
track appear in the display.
If the CD player does not start playing
Some Cia player miidels may not respond when you preas
ST.AR I' rm the remote ot the recorder. Press
II on the
remote ol the CD player insteaii.
7 Press S LOP to stop svnchro-recorciing.
To pause recording
Press STANDBY or CD Pl.AYF.R II.
To restart recording, p>ress START or CD PI.AYFR II.
A new track number ic created ccich time you pause recording.
You can use the remote of the CD player during
synchro-recording
Press ■.
The CD player stops and the recorder pauses for
recording.
i o restart synchro-recording, press ►.
You can change CDs during synchro-recording
Do the tollowing steps instead ot Step 7 aboye.
1 I’ress ■ on the remote of the CD player.
The recorder pauses for recording.
2 Change the CD.
3 Press ►- on the remote of the CD player.
Svnchro-recorciing restarts.
'Q' You can check the remaining recordable time on the
MD
1 Set the source selector on the amplitier to C7D.
Press DISPLAY (.see page 8).
2 Do Stepis 2 to D in "Recording on an MD" on page 6
to prepare the recorder for recording.
3 Insert a CD into the CD player.
4 Select the playback moefe (sliuftle play, program
play, etc.) on the CD player.
5 Press STANDBY.
The CD player pauses for playing anci the recorder
pauses for recording.
10