Two Brothers Racing Honda CBR250R - Manual (Page 4)

ITBR001-302 www.twobros.com 2011 Honda CBR250R - 4
5. Attach the Juice Box Pro harness to the stock wiring harness and the fuel injector
as shown in Figure D.
6. Locate the Throttle Position Sensor (TPS) connector.
The TPS connector is located on the left side of the
throttle body as shown in Figure E.
7. Using the supplied posi-tap, connect the grey wire
from the Juice Box Pro to the yellow wire of the stock
harness.
8. Locate the stock O2 sensor connector.
The stock O2 sensor connector is located on the left side of the motorcycle near
the coolant line as it comes out the top of the radiator. This is a black connector
with a single blk/yel wire.
9. Unplug this connector from the main wiring harness.
10. Attach the Juice Box Pro harness to the stock O2 sensor and wiring harness as
shown in Figure F.
FIG
.D
FIG
.E
FIG
.F