Two Brothers Racing Polaris Ranger RZR900 - Manual (Page 2)

V.A.L.E.
V a r i a b l e a x i s l o c k i n g e x h a u s t
TM
Installation Instructions
Installation Instructions
2011 Polaris
RangeR RZR 900 XP
V.A.L.E.™ Dual Full Exhaust System with M-7 Aluminum Canister
Part # 005-3090106DV
7. Remove OEM bolts above left and right wheel wells as shown in photo.
8. Install new supplied mounting bracket in both wheel wells using supplied
8x25mm bolts and rear bolts will use supplied 8mm nuts.
9. Re-route the clear hose from behind the driver seat to
go under the frame bar.
10. Using supplied 6x14mm bolt and nut install rubber
liner to retaining bracket and mount as shown behind
drivers seat. Loosely wrap hoses and bracket with
supplied ziptie, make sure you have rubber side down
on bracket.
11. Install header collars and flanges with spring hook ears
on top as shown.
12. Install headers using supplied spring hooks as shown,
tighter radius header installs on passanger side.