Two Brothers Racing Kawasaki Ninja 3000R - Manual (Page 2)

Installation Instructions
Care & Cleaning
Care & Cleaning
Keep system free of dirt and moisture. Store in a cool, dry place. Make sure vehicle is
completely cool before maintenance.
Stainless Header System: Polished stainless steel pipes will turn a light golden hue
after a few heat cycles, this is a normal characteristic of high quality stainless steel.
Clean using a mild water based spray cleaner. Always apply cleaner or polish with a
soft, clean cloth.
Titanium Header System: Polished titanium pipes will experience color shift ranging
from deep blue/purple through amber after a few heat cycles. This is a normal
characteristic of high quality titanium. Clean using a mild water based spray cleaner.
Always apply cleaner or polish with a soft, clean cloth.
Polished Aluminum Canisters: Use an aluminum or mag wheel polish to restore the
bright finish to factory spec.
Brushed Aluminum Canisters: Clean using a mild water based spray cleaner. Always
apply cleaner or polish with a soft, clean cloth.
Carbon Fiber Canisters: Clean using a mild water based spray cleaner. Always apply
cleaner or polish with a soft, clean cloth. Always make sure the fiberglass packing inside
is in good condition and not burned out, as exhaust heat inside an empty canister will
deteriorate the carbon fiber sleeve.
TBR sells repack kits (Road - #005-10038, Offroad - #005-10038MX) that include
everything you need to easily do it yourself.
Titanium Mufflers: For cleaning use a mild water based spray cleaner. Always apply
cleaner or polish with a soft, clean cloth. Always make sure the fiberglass packing inside
is in good condition and not burned out, as exhaust heat inside an empty canister will
deteriorate the carbon fiber sleeve.
TBR sells repack kits (Road - #005-10038, Offroad - #005-10038MX) that include
everything you need to easily do it yourself.
Repack all road canisters at the first signs of packing material deterioration. Part #005-10038
Repack all offroad canisters after every 10 hours of use. Part #005-10038MX
NEVER dyno test your bike with carbon fiber or titanium canisters installed - the
intense heat and lack of cooling air can quickly burn through the canister material. Two
Brothers Racing does not provide a warranty for burned canisters.
Kawasaki
NINJA 300
Full Exhaust System
Part # 005-3890105-T
Qty. Description Part Number
1 Muffler Canister Varies
1 Slip-On Tube 005-38901S
1 Header 005-32701H
1 57mm Barrel Clamp 005-27-57MSH
1 58mm Barrel Clamp 005-27-58MSH
1 Bracket 005-327-B
1 Insert 005-305-21
1 Rubber Grommet 005-GROM-1
1 8x25mm Socket Head Cap Screw 005-SH825
1 6x45mm Socket Head Cap Screw 005-SH645
1 8x16mm Socket Head Cap Screw 005-SH816
1 Flange Nut 6mm 005-FN6
2 Flange Nut 8mm 005-FN8
2 45mm Spring 005-S45
1 Anti-Seize 031-P09175
1 TBR Sticker Kit 015-10212
1 Spring Puller 005-SP
10. Install aluminum insert with shoulder facing out.
11. Apply a thin layer of anti-seize to slip tube outlet and
connect to muffler with supplied hook springs.
12. Slide 58mm barrel clamp on the end of the slip-on
tube.
13. Install the TBR muffler assembly to the motorcycle
and attach using the supplied 8x25mm socket bolt and
8mm flange nut.
14. Tighten barrel clamp.
15. Re-install lower fairing.
16. Double check your work.
17. Before you run the bike, clean off all fingerprints
and dirt, as any oily residue will etch the metal and
become somewhat permanent when the system
gets hot. Run the bike and enjoy. It is normal for
some white smoke to appear the first time you
start the bike. This is packing/manufacturing oil
from inside the pipe burning off. Check for gaps or
leaks. If you find a leak, a little high temperature
silicon sealant should fix it. After 50 to 100 miles,
recheck all fasteners for tightness.