Two Brothers Racing Kawasaki Ninja 3000R - Manual

IMPORTANT - PLEASE READ CAREFULLY
We recommend that this performance part be installed by a qualified
motorcycle technician. If you have any doubts as to your ability to install this
performance part, please consult with your local motorcycle dealer. Read all
instructions first before starting installation. Make sure the motorcycle and
exhaust system are completely cool before starting the installation. Also,
make sure the bike is secure on a centerstand or ideally a service lift during
installation. Be sure to save all stock components for possible use later.
Installation Instructions
Kawasaki
NINJA 300
Full Exhaust System
Part # 005-3890105-T
1. Make sure the bike is completely cool before
starting the installation. Make sure the bike is
secure on a centerstand or ideally a service lift.
2. Remove bottom fairings by removing six bolts. (3
each side)
3. Remove the OEM muffler assembly.
4. Remove OEM header and save header gaskets for
use with TBR header.
5. Remove clip and pin from passenger foot peg,
replace with 6x45mm bolt.
6. Install Muffler bracket using previously installed
6x45mm bolt and OEM muffler bolt. Use supplied
6mm nylon lock-nut to secure in place.
7. Install stock gaskets on TBR exhaust header and
mount to bike.
8. Install mid-pipe to bike using 57mm barrel clamp
and 8x16mm flange bolt and nut.
9. Install rubber grommet into muffler bracket.
Warranty
Two Brothers Racing products are intended for closed course competition purposes only, and therefore are sold “as is” without war-
ranty. Two Brothers Racing specifically disclaims any warranties of merchantability or fitness for a particular purpose and disclaims all
responsibility for consequential and incidental damages or any other losses arising from the use of these products or parts.