Two Brothers Racing Kawasaki KFX400 - Manual (Page 2)

(Continued from page 1)
15. Check to make sure all hardware is securely tightened.
16. Before you run the ATV, clean off all fi ngerprints and dirt, as
any oily residue will etch the metal and become somewhat
permanent when the system gets hot. Run the ATV and enjoy.
It is normal for some white smoke to appear the fi rst time you
start the ATV. This is packing/manufacturing oil from inside
the pipe burning off. After 30-60 minutes of use, recheck all
fasteners for tightness.
Installation Instructions
Care & Cleaning
Care & Cleaning
Keep system free of dirt and moisture. Store in a cool, dry place. For cleaning use a mild
spray cleaner. Always apply cleaner or polish with a soft, clean cloth.
Stainless Header System: Polished stainless steel pipes will turn a light golden hue after a
few heat cycles, this is a normal characteristic of high quality stainless steel.
Carbon Fiber Muffl ers: Always make sure the fi berglass packing inside is in good condition
and not burned out, as exhaust heat inside an empty canister will deteriorate the Carbon
Fiber sleeve. TBR sells repack kits (TBR part # 005-10038) that include new rivets and repack
material as well as a drill bit (#30), making it easy to do yourself. Also, NEVER dyno test
your bike with carbon fi ber muffl ers installed - the intense heat and lack of cooling air can
quickly cause the CF material to burn. Two Brothers Racing does not provide a warranty for
burned carbon fi ber.
Aluminum Muffl ers: Use an aluminum or mag wheel polish such as Mother’s to restore the
bright fi nish to factory spec.
V.A.L.E.
V A R I A B L E A X I S L O C K I N G E X H A U S T
TM
2005-06 Kawasaki
KFX700
Complete Exhaust System with M-7 Canister
Part # 005-1430106V