Two Brothers Racing Honda CBR650F User Manual
Cbr650f, Honda

IMPORTANT - PLEASE READ CAREFULLY
We recommend that this performance part be installed by a qualified motorcycle
technician. If you have any doubts as to your ability to install this performance part,
please consult with your local motorcycle dealer. Read all instructions first before
starting installation. Make sure the motorcycle and exhaust system are completely cool
before starting the installation. Also, make sure the bike is secure on a center stand
or ideally a service lift during installation. Be sure to save all stock components for
possible use later.
Installation Instructions
1.
Make sure the bike is completely cool before starting
the installation. Make sure the bike is secure on the side
stand or ideally a service lift.
2.
Remove the right and left side fairing to expose the
exhaust assembly.
3.
Remove the right foot rest assembly to access muffler
mounting bolts.
4.
Remove muffler mounting hardware.
5.
Remove O2 sensor from OEM muffler.
6.
Remove header nuts from cylinder head and remove
header assembly.
Honda
CBR650F
Full Exhaust System
Part # 005-4020105-T
Parts List
7.
Remove plate from lower frame rail. Save hardware for
use with TBR bracket.
8.
Install O2 adaptor onto TBR connector pipe.
9.
Install TBR header assembly using OEM hardware and
gaskets.
10. Apply anti-seize to O2 sensor threads and install onto
TBR head pipe.
11. Install TBR bracket to OEM mount using stock lower
bolt, 8x45mm socket head bolt, and 8mm flange nut.
1
8” Tarmac Muffler
-
1 Header
005-40201H
1
Bracket
005-402-B
2
45mm Swivel Hook Springs
005-S45
2
8mm Flange Nut
005-FN8
1
8x20mm Socket Head Cap Screw
005-SH820
1
8x45mm Socket Head Cap Screw
005-SH845
1
02 Adaptor Kit
005-04-22AD
1
Anti-Seize Lubricant
031-P09175
1
Spring Puller
005-SP