Casio EX-V7 - Manual (Page 72)

72
SHOOTING A SNAPSHOT
■
Turning Off Digital Zoom
You can turn off digital zoom if you want to use optical zoom
only. This will help to avoid deteriorated images due to
accidentally switching over from optical zoom to digital zoom
when shooting snapshots.
1. In a REC mode, press [MENU].
2. On a “REC” tab, select “Digital Zoom” and
then press [
X].
3. Use [ S] and [T] to select “Off” and then press
[SET].
• If you want to show the entire digital zoom range, select
“On” here.
Perform the following steps to
select the flash mode you want to
use.
Using Flash
Flash Setting Description
Auto Flash Flash fires automatically in accordance with
exposure (amount of light and brightness)
conditions. This setting can be used to
reduce the red eye effect that occurs in
images of people shot with flash.
• Initial factory default setting.
Flash Off Flash does not fire.
Flash On Flash always fires.
• This setting can be used to brighten a
subject that normally comes out dark due
to daylight or backlight (daylight synchro
flash).
Flash