Eagle Electronics 502C - Manual (Page 95)

89
Selecting the category name and pressing ENT will show the category's
contents, so you can choose items within it. An expanded category (one
with a "–" next to its name) can be collapsed to hide its contents, and
make more room on your screen. Just select the category name and
press
ENT .
3. Expand any categories that might contain information you want to
display. Then press
↓ or ↑ to select a display option.
4. With the option highlighted, press ENT to check it (turn on) and un-
check it (turn off). As you turn categories on, data will float in your dis-
play window. Every Page display has a maximum number of items you
can float on your display using the Overlay Data command.
5. After all options are set, press EXIT | EXIT to return to the page display.
From Overlay Data Shown (left) press ENT to see Data Viewer (center).
Select a category and press ENT; then select information to float on
screen and press ENT (right).
To remove overlaid data:
1. While on the Page that shows the item or items you want to remove,
press
MENU |
↓ to
O
VERLAY
D
ATA
| ENT .
2. You'll see a list of the overlay data currently displayed. Select the
item you want to remove from your display and press
ENT | ENT to re-
move the data. To remove another item, select the item and press
ENT | ENT .
3. When you have finished removing all the items you want from the
screen, press
EXIT to return to the page display.