Eagle Electronics 502C - Manual (Page 112)

106
Find Highway Exits command (left) and Find Exit menu at right.
2. First, select a highway name by pressing ENT , which calls up the
Find By Name menu. There are two highway search options: A. You
can spell out the highway name in the top selection box. Press
↑ or ↓
to change the first letter, then press
→ to move the cursor to the next
letter and repeat until the name is correct, then press ENT | ENT . B.
Jump down to the lower selection list by pressing ENT , then press
↓ or ↑
to select a highway from the list, then press ENT .
Find By Name menu.
3. Once you have selected a highway name you can then select an exit.
Press
↓ to switch to the Exit List, then press ↓ or ↑ until you highlight
the exit, then press ENT.