Eagle Electronics 502C - Manual (Page 73)

67
2. Press WPT |
→ to
D
ELETE
W
AYPOINT
| ENT |
← to
Y
ES
| ENT . To return to
the previous page and clear the cursor, press EXIT .
To delete all waypoints at one time: press MENU | MENU |
↓ to
S YSTEM
S ETUP
| ENT |
↓ to
D ELETE A LL M Y W AYPOINTS
| ENT |
← to
Y ES
| ENT . To return
to the previous page, press EXIT | EXIT .
Edit a Waypoint
Waypoint Name
To edit waypoint name:
1. Press WPT |
↑ to
M
Y
W
AYPOINTS
| ENT | ENT | ENT |
↓ to waypoint
name| ENT |
→ to
E DIT W AYPOINT
| ENT | ENT .
2. Press
↑ or ↓ to change the first character, then press → to the next
character and repeat until the name is correct. Press ENT then
EXIT | EXIT | EXIT | EXIT to return to the previous page display.
Waypoint Symbol
To edit waypoint symbol:
1. Press WPT |
↑ to
M Y W AYPOINTS
| ENT | ENT | ENT |
↓ to waypoint
name| ENT |
→ to
E
DIT
W
AYPOINT
| ENT |
↓ to
A
LTITUDE
|
→ to
C
HOOSE
S YMBOL
| ENT .
2. Use arrow keys to select desired symbol and press ENT . To return to
the previous page, press EXIT | EXIT | EXIT | EXIT .
Waypoint Position
To edit waypoint position:
1. Press WPT |
↑ to
M Y W AYPOINTS
| ENT | ENT | ENT |
↓ to waypoint
name| ENT |
→ to
E DIT W AYPOINT
| ENT .
2. Latitude: press
↓ to
L ATITUDE
| ENT . Press
↑ or ↓ to change the first
character, then press
→ to the next character and repeat until the lati-
tude is correct. Press EXIT .
3. Longitude: press
↓ to
L
ONGITUDE
| ENT . Press
↑ or ↓ to change the first
character, then press
→ to the next character and repeat until the lon-
gitude is correct. Press EXIT .
4. When latitude and longitude are correct, return to the previous page:
press
EXIT | EXIT | EXIT | EXIT .
Selecting a Waypoint
To select a waypoint on the map (for navigating to, for editing, etc.,) use
the arrow keys and center the cursor over the waypoint. A highlighted
halo will appear around the waypoint.