Inserting a pc card (when using the paper holder) – Casio IT-3100 User Manual

Page 66

Text mode
Original mode

E-64

Using PC Cards

Removing a PC Card

Press the eject button on the left side of PC
card slot with the stylus as shown by the
arrow, and pull out the PC card while
holding onto the end of the PC card
removal tape.

Inserting a PC Card (When Using the Paper Holder)

Check the names of the parts of the Paper Holder before beginning work.

1. Check that the power is off. If the power is on, always make sure to turn it off by

pressing the power key.

2. Spread apart both ends of Part A of the

Paper Holder ( ) and remove it from
the Handheld Printer Terminal ( ), and
then remove Part C and Part D ( ).

• Remove Part C and Part D using an

ordinary screwdriver as shown in the
illustration.

Part B

Part D

Part C

Part A

Screws (4)

PC card cushion