Dell Dimension 4550 - Manual (Page 112)

112 Appendix
www
.dell.com | support.dell.com
Clearing Forgotten Passwords
CAUTION: Before you begin any of the procedures in this section,
follow the safety instructions on page 9.
If you forget your system or setup password, you cannot operate your
computer or change settings in the system setup program until you clear the
forgotten password(s).
1 Shut down the computer (see page 33).
2 Turn off any attached devices and disconnect them from their
electrical outlets.
NOTICE: To disconnect a network cable, first unplug the cable from your
computer and then unplug it from the network wall jack.
3 Disconnect the computer power cable from the wall outlet, and then
press the power button to ground the system board.
4 Open the computer cover (see page 83).
5 Locate the password jumper on the system board (see page 85) and
remove the jumper plug.
6 Close the computer cover (see page 104), plug your computer into an
electrical outlet, and turn on the computer.
7 When the blue DELL™ logo appears, press immediately to
enter the system setup program.
If you wait too long and the operating system logo appears, continue to
wait until you see the Microsoft
®
Windows
®
desktop. Then shut
down your computer and try again.
8 Use the arrow keys to scroll down to the System Security option on the
system setup program main screen, and then press .
To reset the system password, press twice in the System
Password option.
To reset the setup password, press twice in the Setup
Password option.
9 Press twice, and then select Save Changes and Exit to exit the
system setup program.
10 Shut down the computer (see page 33).