Canon A2200 - Manual (Page 21)

21
You can change the language that displays on the screen.
Enter Playback mode.
z Press the 1 button.
Display the settings screen.
z Press and hold the m button, then
immediately press the n button.
Set the display language.
z Press the opqr buttons to choose a
language, then press the m button.
X Once the display language has been set,
the settings screen will close.
Setting the Display Language
What if the clock appears when the m button is pressed?
The clock will appear if too much time passes between pressing the m button
and the n button in Step 2. If the clock appears, press the m button to
remove the clock and repeat Step 2.
You can also change the display language by pressing the n button
to choose [Language] from the 3 tab.