beautypg.com

Dell PowerVault 770N (Deskside NAS Appliance) User Manual

Page 57

background image

Cabling a SAN-Attached Cluster to a Dell | EMC CX400 Storage System

1. Connect cluster node 1 to the SAN.

a. Connect a cable from HBA0 to Fibre Channel switch 0 (sw0).

b. Connect a cable from HBA1 to Fibre Channel switch 1 (sw1).

2. Repeat

step 1

for each node.

3. Connect the storage system to the SAN.

a. Connect a cable from Fibre Channel switch 0 (sw0) to SP-A port FE 0.

b. Connect a cable from Fibre Channel switch 0 (sw0) to SP-B port FE 1.

c. Connect a cable from Fibre Channel switch 1 (sw1) to SP-A port FE 1.

d. Connect a cable from Fibre Channel switch 1 (sw1) to SP-B port FE 0.

Figure 5-4. Cabling a SAN-Attached Cluster to the CX400 DPE

See also other documents in the category Dell Computer hardware: