Display inverter, Removing the display inverter – Dell Latitude E5400 (Mid 2008) User Manual
Page 34
Back to Contents Page
Display Inverter
Dell™ Latitude™ E5400 Discrete Service Manual
Removing the Display Inverter
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
battery
from the computer.
3.
Remove the
access panel
from the computer.
4.
Remove the
hinge cover
from the computer.
5.
Remove the
keyboard
from the computer.
6.
Remove the
display assembly
from the computer.
7.
Remove the
display bezel
from the display assembly.
8.
Remove the
system board
from the computer.
9.
Remove the screw that secures the LCD inverter to the display assembly.
10.
Flip over the display inverter so that you can access the power cable connector.
11.
Disconnect the display inverter power cable.
12.
Disconnect the display inverter data cable.
13.
Remove the display inverter from the display assembly.
Back to Contents Page
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE:
You may need to install Adobe Flash Player from Adobe.com in order to view the illustrations below.