Installing the software wavetable – Dell Latitude CSx H User Manual
Page 105

1. Insert the System Utilities diskette into the diskette drive.
2. Copy each of the utilities on the System Utilities diskette to the c:\dell directory on your hard-disk drive. The utilities have the following
filenames: mks2d.exe, rms2d.exe, asset.com, and readme.s2d.
For more information on copying files, see the documentation that came with the operating system.
After you copy the utilities to your hard-disk drive, you must restart your computer in the MS-DOS
® mode to use the utilities.
Installing the Software Wavetable
The software wavetable allows you to customize certain audio features. To install the software wavetable, perform the following steps:
1. Save your work in all open application programs, because you will need to restart your computer at the end of this procedure to complete the
installation.
2. Insert the first software wavetable diskette into the diskette drive.
3. Click the Start button, and then click Run....
The Run dialog box appears.
4. Type a:\setup, and then click OK or press
Follow the instructions on your display.
5. After the installation is complete, remove the final diskette from the diskette drive and restart your computer to use the software wavetable.
Back to Contents Page