beautypg.com

Installing touch pad drivers, Installing ms-dos cd-rom drivers, Installing infrared drivers (windows 95 only) – Dell Latitude CSx H User Manual

Page 100

background image

3. Click the Start button, and then click Run....

The Run dialog box appears.

4. Type a:\setup, and then click OK or press .

5. Follow the instructions on your display.

6. After the installation is complete, remove the final diskette from the diskette drive and restart your computer to use the software wavetable.

Installing Touch Pad Drivers

Touch pad drivers and associated utilities allow you to use and customize the integrated touch pad or an external mouse. To install the touch pad
drivers, perform the following steps:

1. Save your work in all open application programs, because you will need to restart your computer at the end of this procedure to complete the

installation.

2. Insert the touch-pad drivers diskette into the diskette drive.

3. Click the Start button, and then click Run....

The Run dialog box appears.

4. Type a:\setup, and then click OK or press .

5. Restart your computer to activate the drivers.

Installing MS-DOS

® CD-ROM Drivers

CD-ROM drivers must be installed in order to use the MS-DOS CD-ROM utility. To install the CD-ROM drivers, perform the following steps:

1. Save your work in all open application programs, because you will need to restart your computer at the end of this procedure to complete the

installation.

2. Insert the CD-ROM drivers diskette into the diskette drive.

3. Click the Start button, and then click Run....

The Run dialog box appears.

4. Type a:\setup, and then click OK or press to install the utility on your hard-disk drive.

5. Follow the instructions on your display, and when prompted, restart your computer to activate the drivers.

Installing Infrared Drivers (Windows 95 Only)

An infrared port lets you transfer files from your computer to another infrared-compatible device without using cable connections. If your computer
is running the Microsoft Windows 95 operating system, install the infrared drivers by performing the following steps:

1. Make sure that the computer is docked and that a diskette drive is connected to the computer's media bay connector or parallel port.

2. Save your work in all open application programs, because you will need to restart your computer at the end of this procedure to complete the

installation.

3. Insert the infrared drivers diskette into the diskette drive.

4. Click the Start button, point to Settings, and then click Control Panel.

5. Double-click the System icon.

The System Properties dialog box appears.

NOTES: Although your Latitude CS/CSx portable computer does not include an infrared port, the computer supports the infrared ports in
the C/Port Family APR and C/Dock Family Expansion Station.

To use the infrared port, Windows 95 users must install the infrared drivers and then enable them. Windows 98 already includes the
necessary drivers; Windows 98 users need only

enable

the infrared support.