Dell LATITUDE D400 - Manual (Page 22)

Back to Contents Page
Battery Latch
1. Follow the instructions in " Preparing to Work Inside the Computer " to remove the battery and prepare the computer for work.
2. Remove any installed memory modules , smart card, modem , or PC Card.
3. Remove the keyboard .
4. Remove the display .
5. Remove the palm rest .
6. Remove the system board .
7. Press down on the battery latch to remove it.
8. Press in the spring and pull up on the battery latch locking arm.
Back to Contents Page
CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1 spring
2 battery latch
3 battery latch locking arm