Display latch, Removing the display latch, Replacing the display latch – Dell Inspiron 6000 User Manual
Page 15
2.
Reconnect the bottom flex-cable connector to the inverter connector.
3.
Place the display panel inside the display cover.
4.
Replace the eight M2 x 3-mm screws (four on each side) around the display panel.
5.
Replace the
Display Latch
Removing the Display Latch
1.
Follow the instructions in "
Preparing to Work Inside the Computer
."
2.
Remove the
hinge cover
.
3.
Remove the
keyboard
.
4.
5.
Remove the
display bezel
.
6.
Slide the latch to the right and lift up.
7.
Remove the spring that attaches the latch to the display panel.
Replacing the Display Latch
1.
Replace the spring that attaches the latch to the display cover.
2.
Align the latch with the display cover and slide the latch to the left to secure it into place.
CAUTION:
Before you perform the following procedures, see the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE:
To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.
1 spring
2 display latch