Dell Dimension 4700 - Manual (Page 24)

Floppy Drive
1. Follow the procedures in " Before You Begin ."
2. Release and remove the front panel .
Removing a Floppy Drive
1. Disconnect the power and data cables from the back of the floppy drive and from the system board .
2. Remove the floppy drive bracket from the computer:
a. Remove the bracket-securing screw for the floppy drive.
b. Remove the bracket for the floppy drive from the computer.
3. Remove the floppy drive from the bracket:
a. Remove all four drive-securing screws (two on each side).
b. Remove the floppy drive from the bracket.
Installing a Floppy Drive
1. Remove the floppy drive bracket from the computer.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.
NOTE: If you are adding a floppy drive, see " Installing a Floppy Drive ."