Dell PowerVault NX3000 - Manual (Page 23)

Target Details
23
4 Creating iSCSI Targets—To create an iSCSI Target:
Figure 3-1. Creating iSCSI Targets
a In the PowerVault NAS Management Console, right-click iSCSI
Targets on the left pane to launch the Create iSCSI Target Wizard.
The Welcome to the Create iSCSI Target Wizard screen is displayed.
b Click Next.
The iSCSI Target identification screen is displayed.
c Enter the Target name and Description. You can use the Browse
option to view and choose the servers/clients in the network.
The iSCSI initiators identifiers screen is displayed. You must
associate each iSCSI Target with an iSCSI Initiator. The iSCSI
Initiator is the host that requests access to the storage that is
represented by the iSCSI Target name.
d In the iSCSI initiators identifiers screen, enter the iSCSI Qualified
Name (IQN) of the iSCSI Initiator. You can manually enter the IQN
or use the Browse option and choose the iSCSI Initiator from the list.
You can also identify the iSCSI Initiator by using the Advanced
option. When you click Advanced, the Advanced Identifiers screen
appears. In the Advanced Identifier screen, click Add, and enter the
Identifier type and the specific identifying information.