Dell Inspiron 1420 (Mid 2007) - Manual (Page 142)

142
Adding and Replacing Parts
3 Replace the memory module cover and tighten the three screws.
4 Insert the battery into the battery bay or connect the AC adapter to your
computer and an electrical outlet.
5 Turn on the computer.
As the computer boots, it detects the additional memory and automatically
updates the system configuration information.
To confirm the amount of memory installed in the computer, click
Start
→ Help and Support→ Dell System Information.
Modem
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
1 Follow the procedures in "Before You Begin" on page 129.
2 Turn the computer over, loosen the three captive screws on the modem
cover, and then remove the cover.
3 Remove the screw securing the modem to the system board.
4 Remove the modem cable.
5 Remove the modem by using the pull-tab.
1 tab 2 notch 3 memory module
1
3
2