After working inside your tablet-p c, After working inside your tablet-pc – Dell Latitude XT2 (Early 2009) User Manual
Page 85

l
In Windows Vista:
Click Start
, then click the arrow in the lower-right corner of the Start menu as shown below, and then click Shut Down.
l
In Windows XP:
Click Start® Turn Off Computer® Turn Off.
The Tablet-PC turns off after the operating system shutdown process is complete.
2.
Ensure that the Tablet-PC and all attached devices are turned off. If your Tablet-PC and attached devices did not automatically turn off when you shut
down your operating system, press and hold the power button for about 4 seconds to turn them off.
After Working Inside Your Tablet-PC
After you complete any replacement procedure, ensure you connect any external devices, cards, and cables before turning on your computer.
1.
Connect any external devices, such as a port replicator, battery slice, or media base, and replace any cards, such as an ExpressCard.
2.
Connect any telephone or network cables to your Tablet-PC.
3.
Replace the
main battery
.
4.
Connect your Tablet-PC and all attached devices to their electrical outlets.
5.
Turn on your Tablet-PC.
CAUTION:
To avoid damage to the Tablet-PC, use only the battery designed for this particular Dell computer. Do not use batteries designed for
other Dell computers.
CAUTION:
To connect a network cable, first plug the cable into the network device and then plug it into the computer.